What method did you use for install? Ubuntu shows a snap version in their store, its not official and maintained by Ubuntu not us. We have found it has a fair few issues that aren’t present in other packages.

I would reccomend downloading from flathub which you would need to setup manually on Ubuntu. Otherwise our appimage on our website https://prismlauncher.org

We do also have a third party build that is more stable then the snap for Ubuntu on makedeb.

-ZekeZ

Yes, we are planning a qml rewrite, this will likely take a while to fully release, it’s not next version since it would basically be an entire rewrite if I understand our plans correctly. This means that we would have significant changes in the ui and hopefully for the better, I agree the current is subpar.

I’ll be working on rewriting the website and documentation framework before 10.0 then I’ll start some mockups for our new qml design.

There’s a couple other neat things that have been discussed that may be possible with a qml rewrite (no plans yet) such as compiling to mobile. Main benefits are responsiveness and consistency that can be achieved as well as cleaning up many things from the aging codebase since it would likely be a full rewrite.

• ZekeZ

the pen I bought supports tilt. The one starlabs sells does not.

MPP is the protocol and has different versions like how Bluetooth or WiFi do. MPP 2.0 has existed for a while it isn’t new.

pins, its also a gravity stand with weak magnets so it doesnt exactly attach super well to the tablet.

im pretty surs that codeweavers crossover still works for microsoft365. atleast I used it with office365 last year without major issue.

uh no, mpp 2.0 is the pen protocol. tilt was supported day 1.

nah it doesn’t really get that hot, I use it a bit in bed to watch movies and I haven’t found it uncomfortable. Its currently winter here though so the passive may not be as great in summer. Anything that’s going to heat it up a lot though your prolly going to be using it at a desk.

right yeah my bad, all the io is on the right this one doesn’t have a daughter board. The daughter board is for their other laptop. I did buy their pen but its pretty average it works on other tablets but I replaced it with an mp0p 2.0 pen

any mpp pen should support pressure. mpp 2.0 will have tilt and such. personally I have a lenovo precision 2.

Uh, the refresh rate is 60hz the gamut is listed on the specification section. The ram is soldered as it could not be increased it is 16gb which is the max supported by the n200.

main board, screen, battery, daughter board and all the parts can be swapped, they sell them on their website.

I agree the keyboard marketing sucks and the keyboard itself isn’t great either. Granted its nice to have a cheaper option without the keyboard, but in current Linux tablet state you probably still want it.

The specs are pretty decent for a tablet and the price of the device. Can handle most tablet tasks and non graphically intensive. I use it for programming and arts and anything needing more power I offload the compile to my PC.

the wacom pens on wacom tablets are solid but plenty of other pens support force/angle and those do work with the starlite.

Hey, I own one of these. For drawing its pretty solid and most software can run on it. The device support MPP 1.51 and 2.0, they sell a 1.51 pen but its quite expensive for what it is. The digitizer isn’t amazing and I have found external wacom screens to be better but considering the price of the starlite is about the same (when I bought it) as an only drawing tab I went with the starlite.

Performance is decent, I was quite surprised how managable the n200 is. Personally I use it as a study device and it handles 40 Firefox tabs and 15-20 windows just fine. Only thing is that gnome does not support triple buffering yet so overview animation is slightly laggy on the 3k screen, however this is less on the 2k version and fixed with the triple buffer PR.

The screen itself comes in either 3k or 2k. The 3k screen was only the first batch and the second+ batch is 2k. Screen is 60hz and I believe 300 nits.

To get buttons mappable on the pen device currently you have to use a custom libwacom entry. I have a PR for that on the github.

The Tablet itself is very solid the main complaint I would have is the keyboard, its quite mushy and bounces as it doesn’t have much structure. Its alright but not amazing.

Realistic battery is 4-6hr under usage and 9-13 with light usage and ~2 days in full sleep.

main board, screen, battery, daughter board and all the parts can be swapped, they sell them on their website.

I can’t speak internationally or legally but from what I know from friends in similar jobs daily prices changes aren’t uncommon. The reason and when it happens often is normally the start of the day when there is a new batch of tickets. They don’t go up instantly and multiple 100s of tickets normally take a couple hours to get placed depending on how many/busy staff are.

Main thing is e-ink’s don’t really make this significantly better or worse. I personally think they are neat for the end worker. The problem is that this is allowed or not enforced well.

Lots of stores do have the price guarantees, you just need to ask someone. For example we have 7 days but you need to ask an employee for a quote first. Also I might be willing to quote a single pencil but I don’t think everyone is, its normally big ticket items or a group of things.

Paper tickets at work but change frequently. Had this happen a couple times. Since its manual we normally ask if someone updated the isle. I’ve had to respond a few times and had the ticket in my pocket still.

If there is major doubt though register price will be used, it’s not hard for someone to lie or move a ticket.

Oh also iirc there is a way to check price history to see if someone is lying so that can be used too if the store has that in the system.

Best thing for any store is to take a photo tbh since its not just eink.

I don’t really agree with this but its the way it is.

Paper ticket stores already do this, its just a more work for the workers than e-ink.

Take a photo of it, I work with paper but we change our tags frequently. We often have prices changed when a customer reaches checkout. I’ve also had times where a customer came back to check a shelf tag after I just updated it. I honored the previous price those times as I was still holding the tickets but its not a guarantee even in paper stores.

Work in retail without e-ink and a lot of the concerns people have here already happen with paper. We do full store paper price tag updates daily, also someone will go around with a scanner making sure prices are up to date with website and print new sheets if not.

Normal days will consist of 3-5 new batches of tickets with the full store update batch containing normally ~10-20 a4 sheets. This isn’t a huge store either I imagine most wallmarts would have more products.

The prices already update super frequently and e-inks don’t really change that. It basically just cuts out the printing and placing, the person running around with the scanner now updates prices.

I think for workers they are nice as they reduce the chance of paper cuts and the back and leg pain from changing the 100s of bottom shelf tags.

The benefit for stores is they likely don’t need to hire as many people, less training and possibly reduced material cost over time as the paper would probably add up.

I currently do this with mailbox .org, I spend 4 euros a month for 2 accounts (3+1). This allows us to use the same domain, share storage and sync calendars. Mailbox also stacks up pretty well against proton in security and privacy just doesn’t have a free plan and some of the little extras. It also supports catchall and full filtering if you really wanted to save the extra euro and use one account.

No I think its just cheaper, if it was stronger you normally would have a metal plate or the entire base would be metal. The only time I have seen those fail was actually the hinges themselves and not the attachment points. If the metal plate or base somehow got severely damaged I doubt it would cost much more to repair and its still unlikely to damage anything else.