South Korea is beginning the mass production of a low-cost laser weapon that has successfully shot down small drones during testing, the country’s key arms agency said Thursday.

The laser weapon, called Block-I, “can precisely strike small unmanned aerial vehicles and multicopters at close range,” a news release from South Korea’s Defense Acquisition Program Administration (DAPA) said.

The release did not give a cost for the weapon, but said each shot fired would only cost about $1.50.

Imagery supplied by the agency appears to show a weapon around the size of a shipping container with a laser mounted on top and what appears to be a radar or tracking device mounted on one side of the platform.

  • someguy3@lemmy.world
    link
    fedilink
    English
    arrow-up
    66
    arrow-down
    3
    ·
    4 months ago

    Will they be mounted on sharks?

    They seriously need to call the platform sharks.

  • circuscritic@lemmy.ca
    link
    fedilink
    English
    arrow-up
    42
    arrow-down
    4
    ·
    4 months ago

    There is no doubt that lasers will play a bigger and bigger role in combat systems, especially in a layered air defense networks.

    But it’s dishonest how these articles only cite the cost of electricity. It would be like citing the cost of a single shell of artillery to imply that is the only expenditure when the system is used.

    Just like a Howitzer, the parts on lasers experience wear and tear, but to replace them cost a hell of a lot more than a new barrel.

    Yes, in the long-term lasers will be more cost-effective than ground to air missile interceptors*, but any reporting that is clearly trying to make an argument for cost savings, should have the integrity to get figures that factor in battlefield maintenance of those systems.

    *When applicable. Lasers will not remove the need for any existing systems, but will provide a cost savings by providing additional options for the air defense system’s operators.

    • jorp@lemmy.world
      link
      fedilink
      English
      arrow-up
      16
      ·
      4 months ago

      When discussing deterrents against drone swarms the cost per “round” is the correct metric…

      • circuscritic@lemmy.ca
        link
        fedilink
        English
        arrow-up
        12
        arrow-down
        2
        ·
        4 months ago

        The cost per round is a lot more than just power generation when talking about lasers.

        The wear on tear on lasers is a lot different than other systems and when the case is being made for their cost effectiveness they need to be factored in, instead of the highly misleading figures that only prices out electricity.

        • CanadaPlus@lemmy.sdf.org
          link
          fedilink
          English
          arrow-up
          7
          ·
          edit-2
          4 months ago

          What kind of wear are we talking about? Some of the laser types I can think of don’t seem like they would need to wear out.

          • KillingTimeItself@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            7
            arrow-down
            1
            ·
            4 months ago

            it’s not just the laser…

            It’s the optics, it’s the cooling, it’s the physical mechanics it’s built on, the laser may be pushed well over it’s designed target range causing it to breakdown further.

            The power supply for the laser, the circuitry for control (to some degree) and most importantly, where ever you source that energy from. Presumably a super cap bank and a generator? Maybe batteries? Who knows.

            • Batman@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              4 months ago

              Worked at a spring factory, a laser manufacturer bought copper springs by the boat load because they’d melt I guess

              • KillingTimeItself@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                4 months ago

                i would assume they used them in a heat sinking deal. Presumably to apply pressure to a diode package into a heatsink, while sinking heat, or something along those lines. Could be galvanic corrosion reasons also i guess.

            • CanadaPlus@lemmy.sdf.org
              link
              fedilink
              English
              arrow-up
              2
              arrow-down
              1
              ·
              edit-2
              4 months ago

              The mount would wear out, that’s true. As would the cooling pump, although I don’t see why you wouldn’t just use a cheap one off the shelf. The rest doesn’t theoretically need to wear if you make sure you have enough thermal allowances.

              • KillingTimeItself@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                1
                ·
                4 months ago

                yeah pretty much, optics would likely be pretty temperamental at those power levels, but maybe they aren’t using any? Idk.

                If a bug lands on one while it fires would basically melt the optics instantly. I would imagine.

                • CanadaPlus@lemmy.sdf.org
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  4 months ago

                  Oh yeah, there’s that. Ideally you’d want semi-disposable covers of some kind.

                  How powerful is this thing, anyway? I’m assuming it’s more of an “overheat” than “vapourise” situation.

        • jorp@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          1
          ·
          4 months ago

          I mean, sure that’s fair, and the figures could be updated to include that. But the order of magnitude difference between this and explosive ammunition is 10,000x or more. Unless these are single fire, I’m not convinced it changes the calculus

      • CanadaPlus@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        4 months ago

        Even in the very long term, loss of equipment to enemy fire is non-negligible during active combat, so you need to tack on the purchase cost in some manner.

        In the shorter term you have to buy a 30 million dollar laser system, even if you’ll eventually make it back.

    • Tja@programming.dev
      link
      fedilink
      English
      arrow-up
      8
      ·
      4 months ago

      Usually they do quote the cost per shell, not including rifle wear, she’ll transport, oder wages, etc. Or missile, in case of patriot systems.

  • JohnDClay@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    32
    arrow-down
    1
    ·
    4 months ago

    What’s the kW or MW class of laser? If it’s too low, it could be ineffective against even tinfoil wrapped quad copters.

    • IphtashuFitz@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      4 months ago

      Might still be powerful enough to blind the optics, which would effectively cripple them. Without a video feed neither FPV drones nor grenade-dropping ones would have the necessary precision to be effective.

      • JohnDClay@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        8
        arrow-down
        2
        ·
        4 months ago

        Unless they’re gps guided, or they can turn their camera away from the laser source in time.

        • Buelldozer@lemmy.today
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          4 months ago

          Unless they’re gps guided

          These lower power DEW systems don’t target the optics they target propulsion, like the actual rotors themselves. Takes about 1-2 seconds to knock them out on the ISR type drones, maybe a bit longer on the FPV type depending on size.

          • JohnDClay@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            3
            ·
            4 months ago

            I’d have thought the rotors would be harder to melt though because of their speed and cooling, but I guess it would work. Could you electroplate the rotors?

            • Buelldozer@lemmy.today
              link
              fedilink
              English
              arrow-up
              4
              ·
              4 months ago

              Could you electroplate the rotors?

              I’m sure you could but the more armor you stack on the more you reduce the performance.

        • IphtashuFitz@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          arrow-down
          1
          ·
          4 months ago

          GPS wouldn’t be effective at all for drones dropping munitions on infantry moving around on the battlefield, nor on FPV drones trying to fly into moving tanks or other vehicles.

          And how do you turn a drone away from an infrared beam of light that would damage the drones optics almost instantly? You’d have to spot the laser system from hundreds of yards away, recognize it’s aimed at your drone, and turn away before the laser is fired. And then what? Just avoid turning your drone back the way you want to go, hoping another strategically positioned laser you didn’t see doesnt fire from a different direction?

          • JohnDClay@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            You’d need to know where the laser system is, yes. You could do that by having a first done get shot at to reveal the position so the others know where not to look.

            Gps would still be effective against stationary targets, but gps jamming would probably be very effective.

    • Nomecks@lemmy.ca
      link
      fedilink
      English
      arrow-up
      8
      ·
      edit-2
      4 months ago

      A buck fifty a shot at the rate I pay is about 12 Kwh kwH 😉 of power. That laser has got to be way up there in power.

      • frezik@midwest.social
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        4 months ago

        Depends on the wavelength. Standard mirrors don’t always do mirror things at wavelengths far outside the visible spectrum.

        Part of the advantages of UAVs is that you can deploy a lot of them cheaply with stuff you buy on eBay. While eBay does sell some of the more exotic mirrors for CO2 laser cutters (which are far-IR wavelengths), you couldn’t buy a lot of them to cover a single drone. It’d cut into the cost advantage, and would also weigh it down a lot.

        • nondescripthandle@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          4
          ·
          4 months ago

          My initial reaction was that it’s going to make drones more cost prohibited. Logistics of only deploying unshielded drones where there aren’t lasers will probably be a thing now too.

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        Even if they can, it will decrease the payload somewhat, and as the lasers get better the shielding will have to get stronger.

        It’ll forever be a back and forth thing

  • snooggums@midwest.social
    link
    fedilink
    English
    arrow-up
    23
    arrow-down
    2
    ·
    4 months ago

    Imagery supplied by the agency appears to show a weapon around the size of a shipping container with a laser mounted on top and what appears to be a radar or tracking device mounted on one side of the platform.

    So, 30 million for the setup and deployment but 1.50 per drone. Plus it is huge and unweildy.

    Gonna need a lot of drones to make that more cost effective than another drone with a stick or net, both of which have been effective in the defense of Ukraine.

    lol

    This is probably an early step towards a man portable setup so I’m just joking about the focus on the cost to fire.

  • makyo@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    ·
    4 months ago

    So would this potentially reset the battlefield and negate the disruptive changes drones had brought to it? Or does it just mean more drones and stronger drones?

    • bluGill@kbin.run
      link
      fedilink
      arrow-up
      5
      ·
      4 months ago

      Shotguns have a useful range of about 50 meters while these are short range, is that long enough?

        • bluGill@kbin.run
          link
          fedilink
          arrow-up
          2
          ·
          4 months ago

          A little but the aerodynamits of shot will always be bad. A riifle will beat shot for range and accuracy. However for something moving that is close the in accuracy of shot improves your stastical odds of a hit.

  • blazera@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    4 months ago

    I hope this works how it sounds. The development of fighter planes, missiles and bombs, and drones has pretty grossly given an edge to invading militaries, able to quickly enter territory and do tremendous amounts of damage, especially to civilian life.

    Being a bulky, heavy weapon with a reliance on a lot of electricity should hopefully encourage this for defensive use, and if it can keep all those flying invaders in check this could be a boon against war.

  • AutoTL;DR@lemmings.worldB
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    4 months ago

    This is the best summary I could come up with:


    South Korea is beginning the mass production of a low-cost laser weapon that has successfully shot down small drones during testing, the country’s key arms agency said Thursday.

    The laser weapon, called Block-I, “can precisely strike small unmanned aerial vehicles and multicopters at close range,” a news release from South Korea’s Defense Acquisition Program Administration (DAPA) said.

    Future versions could be developed to take out much bigger targets, including aircraft and ballistic missiles, which would be a potential “game changer,” according to the release.

    DAPA will develop “a laser anti-aircraft weapon (Block-II) system with improved output and range compared to the current one,” the release said.

    In Ukraine, the Middle East and elsewhere, small drones - some available off the shelf - have shown the ability to disable or destroy multimillion-dollar pieces of military hardware, including tanks.

    Earlier this year, Britain showed off a new laser weapon that its military says could deliver lethal missile or aircraft defense at around $13 a shot.


    The original article contains 529 words, the summary contains 163 words. Saved 69%. I’m a bot and I’m open source!

    • afraid_of_zombies@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      4 months ago

      Well assuming one with explosives can take out a single person, they get a 10% accuracy (number pulled out of my ass), and a VSL (value of statistical life) of 1.5 million you get 150,000 USD.

      Really throws off the cost function when the false negative penalty is a million times bigger.